• Available in 4,380-lumen D4, or 7,665-lumen D7 option
• Direct upgrade from factory halogen headlight
• Includes plug-&-play high/low wiring adapter
• Reliable PWM dimming decreases power draw on low setting 
• On-the-fly aiming with increased adjustability 
• Powder-coated steel mounting frame & aluminum faceplate
• Spot & Hybrid lens included with D4 option
  
• ECE approved high beam spot optics (D4 & D7 option)
  
• Amber & Selective Yellow lens options (available separately)
  
  

Our Husqvarna Rally Headlight Kits are the easiest and most low-profile way to add our industry-leading offroad lighting to your Husqvarna enduro motorcycle! We use 3D scanning technology to guarantee a perfect fit in your original headlight mask. Our kits include a plug-&-play wiring adapter and our proven DataDim controller so the DENALI light pods will jump between half and full intensity with your original high beam switch! 

By using a proper PWM dimming module, our kits our more reliable and draw half the power (on low) than the competitors who use inefficient resistor dimming. This outdated approach strains the LEDs, creates heat, and draws full power even on low. 

Product Bundle Contents

The D4 bundle LAH.24.10100 includes:

• (1x) DNL.D4.050 - D4 Light Pod  
• (1x) LAH.24.10000 - Husqvarna Rally Headlight Mounting & Wiring Assembly
  

The D7 bundle LAH.24.10200 includes:

• (1x) DNL.D7.050 - D7 Light Pod  
• (1x) LAH.24.10000 - Husqvarna Rally Headlight Mounting & Wiring Assembly
  

Product Fitment

• Husqvarna FE 250 2017-2021
• Husqvarna FE 350 2017-2023
• Husqvarna FE 450 2017-2023
• Husqvarna FE 501 2017-2023
• Husqvarna TE 150i 2015-2021
• Husqvarna TE 250i 2015-2021
• Husqvarna TE 300i 2015-2021
  
• Husqvarna 701 Enduro 2020-2023
  
  

Note that Husqvarna TC and FC models are not listed as direct fitments because they do not have a factory headlight or switch. Installation may be possible on these bikes with the addition of a plastic headlight mask and traditional 12v wiring harness. Check for sufficient electrical output and that you have a 12v battery before purchasing or installing on these models. 

Husqvarna TE models are wired for low beam only, which will operate the D4 & D7 at 50% intensity. Use of a standard wiring harness will allow you to run at 100% intensity.

Instruction Manual Download

• PDF Instruction Manual (English)